成人AV天堂,强行入侵粗暴人妻中文,亚洲男人天堂手机版,国产三男一女4P大战在线视频

技術文章您現在的位置:首頁 > 技術文章
辦公桌做檢測需要用到哪些測試儀器項目
更新日期:2011-08-13   點擊次數:1099次

東莞市海達儀器有限公司為您介紹辦公桌測試儀器項目!

 

1.垂直負載下的穩定性試驗:
Stability test of the vertical load
把試件放在試驗基面上。在其zui不穩定桌邊中心離邊沿向內50mm桌面處通過載入墊垂直向下逐漸加力到規定的力值或者至少試件至少有一個桌腳離地為止。
Place test specimen on the base surface. Impose the force to the table in its center from the edge of the most unstable inward 50mm desktop vertically down through the loading pad gradually with augmented the value or at least one specimen legs up off the ground.
2.
垂直和水平載入穩定性試驗:
Vertical and horizontal load stability test
把試件放在試驗基面上。用擋塊擋住試件zui不穩定邊的桌腳。防止試件在試驗中移動。在該邊中心離邊沿向內50mm桌面處通過載入墊垂直向下施加100N的力。同時在該邊中心桌上向外施加一個水平力。逐漸增加該力到規定值或者至少有一個桌腳離地為止。
Put the specimen on the test-based surface. With the block blocking the most unstable side of the specimen legs to prevent the test specimen to move. The edge center from the edge inward 50mm desktop department
exert downward vertical 100N force by loading pad. While exert a level force on the center desk of the edge, increase gradually to a specified value or one leg near to the floor at least.
3.
垂直靜載荷試驗:
Vertical static load test
在桌面易于發生破壞的位置,按規定的力通過載入墊,垂直向下重復施加10次。每次至少應保持10秒。
On the most easy damaged position of the desk surface , to impose the specified force by loading pad, vertical put down repeated 10 times. Keep 10 seconds at least.
Desktop sustained vertical load test

辦公椅五爪抗壓試驗機

海達儀器所生產的辦公桌測試儀器項目眾多,受保護,在此不一一介紹,咨詢:!

粵公網安備44190002002798號